Calibrate & Measure Thickness

Review cross-sections, calibrate scale, and report thickness with readable annotations.

NotyLibrary -> NotyCheck -> NotyCalibration -> NotyThickness

Intermediate 4-8 min
Start Workflow Read Tutorials
Best for I want to measure the thickness of a coating or layer from a cross-section image.
Input Cross-section Image, SEM, Optical Microscopy, PNG, JPG, TIFF
Output Checked coating thickness report
Estimated time 4-8 min

Before you start

Make sure your image has at least one reliable scale reference. This can be an existing scale bar, a saved calibration, or a known pixel-to-unit ratio. If the image is already calibrated, you can skip calibration setup and continue to Edit or Scale & Export.

  • Microscopy image is ready
  • Calibration reference is available
  • Output format is selected
  • Crop or image cleanup is only used when needed

See the workflow in 30 seconds

This short video shows the full path: import the image, select or create calibration, crop or improve the image, add the scale bar, and export the final result.

30-second workflow preview

Add a video URL in the workflow settings to replace this placeholder.

What you will learn

  • Where to start
  • When calibration is required
  • When to use Edit
  • How to export the final image

Workflow Steps

1
NotyLibrary

Import the cross-section image

Keep the original cross-section and later exports connected in one file context.

2
NotyCheck

Review cross-section clarity

Check edge visibility, contrast, and export readiness before measuring.

3
NotyCalibration

Calibrate the scale

Define the measurement reference so thickness values use real units.

4
NotyThickness

Measure coating or layer thickness

Capture the thickness result and annotate the target region.

5
NotyCheck

Review the annotated export

Confirm the measurement overlay remains clear in the final output.

Common mistakes this workflow helps prevent

Blurred interfaces between layers

Thickness labels that overlap the region of interest

Uncalibrated measurements reported as real values

Expected output

Before

Raw microscopy image with old scale context, unnecessary borders, or no final scale bar.

After

Clean microscopy image with a calibrated, readable scale bar placed in a safe corner.

Export-ready for

Reports, lab notes, scientific slides, manuscripts, documentation, and tutorials.

Frequently asked questions

Why start with cross-section review?

It helps confirm the boundaries are visible enough before you commit to a measurement.

Can I export the annotated result directly?

Yes. The workflow is intended to finish with a reviewed annotated image or report asset.

Ready to calibrate and export your image?

Start with your microscopy image, select calibration, edit only if needed, then add a clean scale bar and export.

Start Workflow Read Tutorials